[Flow-tools] flow-fanout on MAC OSX 10.5.6 not working.

[John Ratcliffe]

Right after I hit the send button it occurred to my tcpdump
wasn't looking at the local interface and sure enough if I used
tcpdump on the local interface it really was working.

sudo /usr/sbin/tcpdump -i lo0 -n udp port 2077

Sorry for the noise.

John.

On Jun 1, 2009, at 12:17 PM, John Ratcliffe wrote:

> Anyone have flow-fanout working on MAC OSX 10.5.6 PPC Leopard?
>
> Here are the commands I have tried and it works except for the
> local host feed to itself on port 2077.
> The feed to port 9985 goes through.
> The flow source router is at 172.16.2.6 sending to port 2075.
> tcpdump shows no packets received on port 2077.
> Spoofing is off since these are on different vlans and our routers
> block invalid spoofed sources.
>
> flow-fanout -V5 -S3 -p - 0/172.16.2.6/2075 0/0/2077 0/172.20.8.7/9985
>
> flow-fanout -V5 -S3 -p - 0/172.16.2.6/2075 0/127.0.0.1/2077  
> 0/172.20.8.7/9985
>
> Currently using flow-tools-0.68.4-rc1.
>
> Thanks John.
>
> UCSD Engineering.
> _______________________________________________
> Flow-tools mailing list
> flow-tools at splintered.net
> http://mailman.splintered.net/mailman/listinfo/flow-tools